LNVR

Symptom Archive/Purge fails due to orphan entries for video events that no longer exist on the recorder. Null entries in the database will cause an error similar to the following: "71 out of 71 video recordings, associated with 'Events', have n...

How to configure exacqVision Server  Procedure Steps Follow these steps carefully to configure the exacqVision Server  with OnGuard: 1) Install the Accessory Add-On for exacqVision Support  on the OnGuard workstation. (located in the Partne...

How to adjust hardware acceleration Procedure Steps If live or recorded video does not appear as expected, the workstation may need to have hardware acceleration disabled for Alarm Monitoring or VideoViewer. In Alarm Monitoring or VideoViewer:...

How to set the CPU limit for Alarm Monitoring or VideoViewer on client computers displaying video Procedure Steps 1) Exit the Alarm Monitoring or VideoViewer application. 2) Open the ACS.INI file in a text editor and add the following lines...

How do I configure a reader input to launch video on alarm? Procedure Steps 1) From the Video menu in System Administration, select Digital Video . The Digital Video folder opens. 2) Click the Device - Camera Links tab. 3) Click [Add]. The...

How to configure DCOM settings for digital video Procedure Steps   Be sure to check the client DCOM settings to enable the correct permissions. - Check the available drive space on all drives. - Check that DCOM settings are the same on all co...

How to configure network storage for the LNVR Procedure Steps LNVR network storage must be formatted in a specific way. Mapped drives appear in the Available Locations list, but will not function properly and should not be used. The full UNC pa...

Question What is the recommended free space setting for an LNVR storage drive? Answer The recommended free space for an LNVR storage drive is 10%. This amount will ensure that large read, write, and delete actions complete reliably and corr...