How to Extend Relay Output Time for Elevator Hardware
Procedure Steps
In some elevator systems, it is necessary to set the relay output time for a longer period.To configure the relay output time, follow the steps below.
1) In System Administration, from the Access Control menu, select Readers.
2) Select the elevator reader.
3) Click Modify.
4) Enter the Strike Time in seconds. The default value is 3 seconds.
4) Click OK to save the change.
Note: These steps will change the relay output time for all outputs that are used as elevator hardware, including outputs on LNL-1200 alarm output panels and LNL-1320 reader interface modules.
