Configuring Pass-Thru Format in VeriAdmin
Procedure Steps
- In VeriAdmin, go to the Unit parameter settings, and then select the Wiegand tab.
- Select the Pass-Thru format.
- Select Custom from the drop down.
- Enter the Total Bits.
- Enter 0 for the ID Start Bit.
- Enter the total number of bits for the Num ID Bits.
For example, enter a 37-bit format as:
- 37 for the Total Bits
- 0 for the ID Start Bit
- 37 for the Num ID Bits
Applies To
VeriAdmin